- Dell perc h200 zip file#
- Dell perc h200 update#
- Dell perc h200 zip#
Once you’ve created the bootable USB drive in step 1 you want to copy the contents of LSI-9211-8i.zip onto the USB drive. First thing we need to do is prepare the USB drive. If it does then write this down so it’s easily accessible. Your card may have a sticker on it marked SAS Address. Make sure you don’t cover the A pins on the other side.ī Pins that need to be covered A Pins that should be left exposed. Thanks to Andy_Steb from AVS for sharing this tip he found. You can cover them with a thin piece of electrical tape. If you have a Dell Perc H310 and your computer won’t boot then you’ll need to cover PCIe pins B5 and B6. Both of these guys have provided great guides on flashing IBM M1015 cards and other great information. Thanks to mobilenvidia and Bryan Vyhmeister () for providing/finding a lot of the files and information used here. The default sas2flash tools are P05 which allow downgrading and flashing of non-compatible firmware in many cases. Dell perc h200 zip#
The ZIP also contains versions of the tools that will make this process a bit easier. This has been updated to support the latest version of FreeNAS. The main firmware file in this ZIP is P20.
This should already be included in the LSI-9211i8i.zip I’ve provided in the next link. You’ll want the version: Precompiled x86_64 UEFI Shell v1 Binary. For those with newer UEFI motherboards you’ll need boot圆4.efi ( link) ( alternate link). You can follow this post on using Rufus to create a quick FreeDOS bootable USB Drive. If you’re just looking for a list of commands that need to be executed then check the very bottom of this page. I’ve also included driver, firmware and sas2flash folders that contain a wide array of sometimes hard to find versions. 
This will help mainly those who were getting stuck on the H200 cards.
Dell perc h200 zip file#
The default sas2flsh.exe and sas2flash.efi in this new ZIP file are p5 which allows you to pretty much overwrite/downgrade any firmware. the difference between the old and new ZIP file is the sas2flsh and sas2flash versions. So I’m not sure why I retyped all of this instead of just updating the ZIP file in the old guide.
Dell perc h200 update#
So this guide will be the update to my first guide… without double checking everything I’m pretty sure it’s almost identical except for the link to the ZIP file. WARNING: If you have an Integrated, Mini or Mini Mono Perc H310 do NOT try to crossflash with these steps.
0 kommentar(er)
